After years of website traffic, the wood floors are losing their radiance. To renew them, sanding as well as re-opening may be required. Below’s ways to sand and also varnish a timber floor.
Cut the film of paint in between the plinth as well as the wall surface with a energy blade. Place a small board against the wall surface so as not to harm it. Get rid of the skirting board with a nail bar or screwdriver against the board. Spread the plinth at the location of each nail. Number skirting boards as you eliminate them to facilitate reinstallation. Get rid of the nails.
To sand a flooring over its whole surface area, make use of a drum sander. Begin using # 80 paper. Starting from the end of the work surface, press the sander in the direction of the floor battens to about 6 “from the wall surface. Elevate the drum while keeping the sander moving. Go back to your starting point and start the next section halfway along the width of the very first section. When the surface area has actually been totally sanded, change the # 80 paper with # 120. Repeat the process making use of # 150 paper to get rid of the marks left by the previous sanding. It is important to work in a well ventilated space. If essential, you could rent out some tools or employ experts. Or else, make certain to follow the directions,
Utilize a perimeter sander, and the exact same sanding paper numbers in the order recommended in the previous action, to sand along the wall surface. Scuff hard-to-reach locations, such as radiators, with a paint scrape. At these same places, sand manually.
Start by using the varnish on the edge of the area using a brush that appropriates for the product utilized. Then utilize an applicator recommended by the maker as well as spread out the varnish over the rest of the flooring. Let the time suggested by sablage de plancher .
To complete the work, sand the surface area utilizing a finishing sander with a fine-grained abrasive pad.